Magnetic stirrers provide stirring and heating reactions for liquids, and our magnetic stirrers are widely used in laboratory and chemistry fields.
Magnetic stirrer with hot plate introduction
Magnetic stirrer with hot plate is an experiment in which a micro-motor drives a high-temperature resistant strong magnet to rotate to generate a rotating magnetic field to drive the stirrer in the container to rotate, so as to stir, mix or assist the heating of the liquid in the container, so that the solution can be fully mixed at the set temperature instrument.
Magnetic stirrer with hot plate working principle
Magnetic stirrer with hot plate utilizes the property of magnetic substances to repel the same sex, and push the magnetic stirrer to rotate by changing the polarity of the two ends of the base. Magnetic stirrer with heater is suitable for heating or heating and stirring at the same time. It is suitable for liquids with low viscosity, or solid-liquid mixtures use the principle of magnetic field and vortex. When the magnetic stirrer hot plate generates a magnetic field, it drives the stirrer to move in a circular motion, so as to achieve the purpose of stirring the liquid: using the property of magnetic substances to repel each other, the chemistry magnetic stirrer rotates by constantly changing the polarities of the two ends of the base.
Magnetic stirrer with hot plate types and structure
Magnetic stirrer with hot plate
Pt100 handle sensor, sensing bracket, wire source, stirring magnet
Magnetically stirred metal bath
*The human alloy sand does not stick to the container wall, avoiding the problem that the silicone oil is difficult to clean up when the oil bath is on the wall, no odor and no pollution
*Precise temperature control, equipped with an external probe hole, which can realize precise external temperature control
DF-101S
*Collective heating
DF-101S collector magnetic stirrer with heater adopts the collector heating method, the heated container is in the intense heat radiation, the temperature is more uniform, the efficiency is higher, and it is more suitable for heating the spherical flask.
* High quality stainless steel heat collecting pot
The collector pot is stamped from high-quality stainless steel, combined with a special heating tube and a high-temperature seal, which can be added with water (water bath) and oil (oil).
bath). The magnetic stirrer hot plate and the electrical box are separated by a heat dissipation plate, which does not affect the electrical performance of the whole machine under high temperature heating and stirring.
Chemistry magnetic stirrer advantages
Compared with ordinary mixers, chemistry magnetic stirrer has the following advantages:
(1) The temperature and temperature display can be set, which can be used for long-term heating, and the digital display is intuitive and accurate.
(2) DC motor is adopted, with low noise and stable speed regulation.
(3) The stirrer is made of PTFE and magnetic steel, which is resistant to high temperature, wear, chemical corrosion and strong magnetism.
(4) The fully enclosed magnetic stirrer hot plate can be used for auxiliary heating and can be used for long-term heating.
(5) It can be mixed in a closed container, which is ideal and convenient to use.
Chemistry magnetic stirrer Application
Chemistry magnetic stirrer is widely used and are mainly used in research fields such as medicine, bioengineering, chemistry, medicine, and food.
Parameter
Model | Control accuracy(℃) | Temperature range(℃) | Stirring Capacity(ml) | Temperature control | Speed mode | Rotary speed |
85-1 | NO | NO | 3500 | NO | NO | 2700R/min |
SZCL-2 | ±1 | RT-300 | 50-20000 | Intelligent | Intelligent | 1800rpm |
DCG-C | NO | NO | 3000 | Voltage regulate | Stepless | 0-2400rpm |
HJ-6 | ±3 | RT-150 | 20-10000 | Voltage regulate | Stepless | 0-2000R/min |
Model | ABH-500 | ABH-1000 | ABH-2000 |
Capacity (L) | 500 | 1000 | 2000 |
Alloy sand amount (g) | 1000 | 1500 | 3000 |
Outer height (mm) | 88 | 98 | 109 |
Inner depth (mm) | 84 | 94 | 103 |
Sand depth (mm) | 40 | 40 | 42 |
Maximum submersion depth (mm) | 64 | 64 | 53 |
Diameter of heat conduction site (mm) | 148 | 178 | 247 |
Model | ABH-500 | ABH-1000 | ABH-2000 |
Capacity (L) | 500 | 1000 | 2000 |
Alloy sand amount (g) | 1000 | 1500 | 3000 |
Outer height (mm) | 88 | 98 | 109 |
Inner depth (mm) | 84 | 94 | 103 |
Sand depth (mm) | 40 | 40 | 42 |
Maximum submersion depth (mm) | 64 | 64 | 53 |
Diameter of heat conduction site (mm) | 148 | 178 | 247 |
Model | ABH-500 | ABH-1000 | ABH-2000 |
Capacity (L) | 500 | 1000 | 2000 |
Alloy sand amount (g) | 1000 | 1500 | 3000 |
Outer height (mm) | 88 | 98 | 109 |
Inner depth (mm) | 84 | 94 | 103 |
Sand depth (mm) | 40 | 40 | 42 |
Maximum submersion depth (mm) | 64 | 64 | 53 |
Diameter of heat conduction site (mm) | 148 | 178 | 247 |